DMHA-BC600/800 Carbon Steel Hydraulic Incline Conveyor
Overall Length: 4.8 meters
(includes a 4000mm incline section and an 800mm horizontal staging tail)
Working Width: 600 mm
(sized perfectly for standard shipping cartons and industrial components)
Structural Build: 3.0 mm thick carbon steel
(for the main line body and keel)
Traction / Belt: 5.0 mm thick grass-pattern PVC belt (high-friction PVK transmission)
Drive Unit: 750W belt drive motor paired with an industrial frequency converter
Hydraulic System: 2200W dual-cylinder setup (delivers 5 tons of lifting thrust)
Payload Rating: 100 kg per meter
Elevation Range: 850 mm - 1800 mm
Bridge the Height Gap, Streamline Your Loading Operations
Loading operations stall when equipment can't bridge the height gap. The DMHA-BC600 and DMHA-BC800 hydraulic climbing conveyors are built to solve that specific problem in warehouse logistics and material handling. Powered by a 5-ton dual-cylinder hydraulic system and a heavily reinforced carbon steel frame, these units handle continuous, heavy-elevation transfers without buckling under payload stress.
Core Advantages & Features
Dial-in Elevation Stop forcing your floor crew to adapt to awkward loading angles. The robust hydraulic system pushes the incline anywhere from 850mm to 1800mm. Easily adjust the conveyor to meet the exact height of the truck bed, shipping container, or mezzanine platform.
Paced, Bidirectional Flow Operation is fully bidirectional, putting you in complete control. The speed is variable from 0 to 30 meters per minute. You can run it fast for clearing empty boxes or dial it down to safely pace 100kg heavy loads.
Zero-Drop Cargo Retention Steep angles usually mean dropped freight. To prevent this, we combine an aggressive high-friction 5.0mm grass-pattern PVC belt with solid, full-length side baffles. This ensures your cargo stays securely on the line from bottom to top, completely eliminating rollback.
No-Nonsense Controls Designed to cut out unnecessary complexities. A single centralized control box houses everything the operator needs: start/stop, directional swap, variable speed dial, hydraulic lift/lower, and an emergency kill switch for maximum safety.
Technical Specifications
Specification | Details |
Overall Length | 4.8 meters (4000mm incline + 800mm horizontal staging tail) |
Working Width | 600 mm (Sized for standard shipping cartons & industrial components) |
Structural Build | 3.0 mm thick carbon steel (Main line body and keel) |
Traction / Belt | 5.0 mm thick grass-pattern PVC belt (PVK transmission) |
Drive Unit | 750W belt drive motor with industrial frequency converter |
Hydraulic System | 2200W dual-cylinder setup (5 tons of lifting thrust) |
Payload Rating | 100 kg / meter |
Elevation Range | 850 mm - 1800 mm |
Where It Fits
⚙️Dock Operations: The 850mm–1800mm lift range is specifically calibrated to match standard flatbeds, box trucks, and shipping containers. It effectively eliminates the manual lifting bottleneck at the bay door.
⚙️Logistics Sorting: The variable speed and reverse functions allow sorting facilities to route parcel flow dynamically between ground-level staging areas and raised distribution platforms.
⚙️Manufacturing Facilities: With its 100kg/m load rating and rigid carbon steel frame, it acts as a hard-wearing transfer link between staggered assembly stations, handling raw materials without flexing.
Need to Verify Specs for Your Floor?
Stop losing time and labor at the loading bay. Contact DAAP Machinery to get current pricing, request technical drawings, or confirm if the DMHA-BC600/800 matches your specific footprint and payload requirements.
